RE: TG-16/PCE mod switch
Ok, my problem is the inconsisten information on the web. What I need to
know is where pin 1 and 38 is. Here is the diagram from the Switch
install information:
PLEASE SEND ME SOME PICS OF THIS INSTALL, MY
SWITCH IS READY TO GO......
Ok, here you see the hucard socket. Right below is a pin diagram, it
seams as if this diagram is saying that pin 38 is on the right side of
this socket, and pin 1 is on the left side. However, in another post,
David Shadoff says that pin 38 is the long pin on a hucard, and pin 1 is
the short pin. That would mean then that pin 38 is in fact on the left
side of this diagram, and pin 1 is on the right side. Someone please
clarify.....
/\ # # HuCard socket unit
front of machine || # # (top view)
# #
#######
#######
||||||| <- pins
10 20 30
38
| | |
| | | | | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| |
* * * * * * * * * * * * * * * | | | | | * | | | * * * * * * * * * * * *
* *
| | | | | | | |
| | | | | | | |
+-----|-|-+ | | | | |
| | | | | | | |
| +---|-+ | | | | |
| | | | | | | |
| | +-+ | | | | |
| | | X | | |
| | | | | | | |
| | | +-|-|---+ | |
| | | | | | | |
| | | +-|-|-|-----+ |
| | | | | | | |
| | | +-|-|-|-|-------+
| | | | | | | |
| | | | | | | |
| | +-|-|-|-|-|-------+
| | | | | | | |
| +---|-|-|-|-|-----+ |
| | | | | | | |
+-----|-|-|-|-|---+ | |
| | | | | | | |
| | | | | | | |
* * * * * * * * * * * * * * * | | | | | * | | | * * * * * * * * * * * *
* *
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| |
| | | | | | |
| | |
10 20 30
38
* these pins go straight through
pins: 16 -> 24
17 -> 23
18 -> 22
19 -> 20
--------
20 -> 19
22 -> 18
23 -> 17
24 -> 16
The pin swapping is symmetrical. However, pin 21 is not rerouted.
C: PcEngine/TG-16 HuCard pinout:
--------------------------------
This information was posted by David Shadoff (xxxxxx@interlog.com)
and is mostly verbatim: